The reasons for the serious wear of the sprocket sprocket socket are as follows: follow the Agricultural sprocket editor to learn about it!
The greater the adhesive wear load and the higher the surface temperature, the more serious the adhesion phenomenon. For metal materials with a certain hardness, wear tests are performed under different pressures to obtain a graph of the relationship between wear rate and pressure. When the pressure reaches more than 1/3 of the hardness of the material, severe wear will occur. According to the stress distribution diagram, it can be seen that the maximum stress contact point is the maximum pressure, and its value is 884.4 MPa. Because the quenching hardness of the chain socket is HRC48~52, the corresponding hardness value is 4800MPa. Therefore, the pressure is far less than 1/3 of the material's hardness, so adhesive wear is not the main form of sprocket wear.