For sprocket components in normal use, in fact, there are still many sprocket component manufacturers in the market. It is also more likely to be worn out during use.
The correct installation of the sprocket can make the chain transmission system have good centering, prevent the chain from being unevenly loaded on its side and destructive wear between the sprocket teeth and the inner chain plate of the chain,
The driven sprocket should have anti-loosening measures; the tightness of the sprocket should be appropriate. If it is too tight, it will increase power consumption and the bearing will wear easily; if it is too loose, the sprocket will easily jump and come off the chain.
In the process of conventional sprocket processing, the root circle is firstly used as the basis, and the center of the circle is found, and at the same time, this is used as the center of the inner and outer circles and the end face of the calibration turning process.
The tightness of the sprocket should be appropriate. If it is too tight, it will increase power consumption and the bearing will be easily worn; if it is too loose, the sprocket will easily jump and come off the chain.
For a metal material with a certain hardness, the wear test is carried out under different pressures to obtain the relationship between the wear rate and the pressure.
The service life of the sprocket is short, which is far from meeting the requirements of production practice. According to the use of the sprocket, processing status, and manufacturing technology,
The use of the bushing is relatively high flexibility, and it can play many roles. In general, the bushing is a type of component that protects the equipment.
Bushing forgings are widely used, and many components in the industrial field, such as valves, bearing forgings and other components, use bushing forgings.
As the main basic transmission parts, sprocket products are characterized by long-distance transmission without affecting the speed ratio.