NEWS CENTER

DWSK Sprocket

Installation and processing method of sprocket


Time:

2023-01-06

Check whether its orientation is in good condition during installation, otherwise it will need to check whether it has been repaired or replace related parts.

①Choose the correct transmission model according to the specifications.
② Check whether its orientation is in good condition during installation, otherwise it will need to check whether it has been repaired or replace related parts.

roller chain wheel sprocket

③ Install the main and driven parts in the correct position in an accurate way, and tighten the fasteners to make it meet the specified torque requirements.
④After installing the chain, after adjusting the degree of tightness, check whether the chain and the sprocket are cooperating smoothly and coplanarly, and there is no interference with the chain cover.
The processing method of the sprocket: 45# is generally used to make it. The material needs to ensure that the teeth have sufficient strength and wear resistance. Therefore, the tooth surface of the sprocket is usually heat-treated to make it reach a specific hardness. If there is black on the appearance, it will be solved.
 

Keywords: