NEWS CENTER
DWSK Sprocket
The use and precautions of the driven sprocket
Time:
2022-11-25
The driven sprocket should have anti-loosening measures; the tightness of the sprocket should be appropriate. If it is too tight, it will increase power consumption and the bearing will wear easily; if it is too loose, the sprocket will easily jump and come off the chain.
1. The driven sprocket should have anti-loosening measures; the tightness of the sprocket should be appropriate. If it is too tight, it will increase power consumption and the bearing will wear easily; if it is too loose, the sprocket will easily jump and come off the chain. The tightness of the sprocket is: lift or press down from the middle of the sprocket, about 2%-3% of the center distance between the two sprockets.
2. After the driven sprocket is loaded on the vehicle, the rear wheel shaft should be adjusted with the adjuster and the rear cradle (also called the rear fork) marking line, so as to avoid the deviation of the rear wheel and prevent the early failure of the sprocket and the chain. wear and tear.
3. Due to the high speed of the automatic sprocket and the small number of teeth, it is normal for the automatic sprocket to wear faster than the driven wheel under the same conditions.
4. The sprocket and chain are also replaced. If only one of them is replaced, the wear on both sides will be increased.
5. Clean and lubricate the transmission chain and transmission sprocket regularly to prolong its service life.
Keywords:
Idler Sprocket with ball bearing,customized Idler Sprocket with ball bearing
Recommended News
DWSK SPROCKET
ADD: Shimenqiao Industrial Zone, Renqiu City, Hebei Province, China
TEL: 0086-317-2805558
FAX: 0086-317-2805556
QQ: 1148504595
E-MAIL: dwsk@vip.126.com
Alibaba: DongWang Sprocket
Mobile Site
Mobile Site
Copyright © 2022 RenQiu Dong Wang Machinery Parts Co., Ltd.