sprocket B type single from China manufacturer introduces the knowledge of disassembly and assembly of sprocket
Time:
2022-03-07
The driving sprocket is combined with the engine output shaft in the form of splines. It is fixed with a spline baffle or a nut. When disassembling, the sprocket cover can be removed, the chain can be removed, the spline baffle or the fixing nut can be unscrewed, and the small sprocket can be pulled out. When assembling, proceed in reverse order.
Sprockets are widely used in life, and they are used in many places. Today, sprocket B type single from China manufacturer will show you how to disassemble and assemble the sprockets. The details are as follows:
1. Active sprocket
The driving sprocket is combined with the engine output shaft in the form of splines. It is fixed with a spline baffle or a nut. When disassembling, the sprocket cover can be removed, the chain can be removed, the spline baffle or the fixing nut can be unscrewed, and the small sprocket can be pulled out. When assembling, proceed in reverse order.
2. Driven sprocket
1. Raise the main support frame to lift the rear wheel.
2. Loosen the rear axle tightening nut and adjuster nut, and remove the chain box and chain.
3. Disassemble the rear brake lever. Pull out the rear wheel assembly together.
5. Remove the bolts, nuts or retaining rings that fix the sprocket, and remove the rear hub or pin bolts of the sprocket.
6. When installing, install in the reverse order. Tighten the sprocket fixing nut or bolt and the rear axle nut according to the specified torque.
The above is the introduction of sprocket B type single from China manufacturer: the knowledge of disassembly and assembly of sprocket.
Keywords:
sprocket,B,type,single
Recommended News
DWSK SPROCKET
ADD: Shimenqiao Industrial Zone, Renqiu City, Hebei Province, China
TEL: 0086-317-2805558
FAX: 0086-317-2805556
QQ: 1148504595
E-MAIL: dwsk@vip.126.com
Alibaba: DongWang Sprocket
Mobile Site

Mobile Site
Copyright © 2022 RenQiu Dong Wang Machinery Parts Co., Ltd.