NEWS CENTER
DWSK Sprocket
Why does the gear rack from China manufacturer have errors during the processing
Time:
2022-06-09
Excessive feed rate will cause the gear cutter to cut the gear rack from China manufacturer untimely, and the surface of the gear rack from China manufacturer will be rough.
Why does the gear rack from China manufacturer have errors during the processing? Let's find out together!
1. During the operation, the machine tool transmission chain with low precision has many vibrations or shocks, which affects the stability of the machine tool transmission.
2. Excessive feed rate will cause the gear cutter to cut the gear rack from China manufacturer in a timely manner, which will cause the surface of the gear rack from China manufacturer to be rough.
3. The sharpening quality of the gear shaper is poor.
4. Let the knife mechanism work abnormally. Return the knife to scrape the surface of the workpiece.
5. The cutting fluid of gear rack from China manufacturer is too dirty, resulting in unqualified surface quality of gear rack from China manufacturer.
6. The blank of the gear rack from China manufacturer is not installed correctly. There is vibration in cutting.
7. The contact between the main shaft of the worktable and the conical guide surface of the worktable shell is unsatisfactory. The contact of the conical guideway surface is too hard. The worktable rotates heavily. Vibration occurs during operation, causing errors in processing.
Keywords:
gear,rack
Recommended News
DWSK SPROCKET
ADD: Shimenqiao Industrial Zone, Renqiu City, Hebei Province, China
TEL: 0086-317-2805558
FAX: 0086-317-2805556
QQ: 1148504595
E-MAIL: dwsk@vip.126.com
Alibaba: DongWang Sprocket
Mobile Site
Mobile Site
Copyright © 2022 RenQiu Dong Wang Machinery Parts Co., Ltd.