NEWS CENTER
DWSK Sprocket
What are the parameters of the skateboard wheel
Time:
2022-08-25
Skateboard wheels are usually made of polyurethane as the main material. The proportion of polyurethane in the wheel is different, and the hardness of the wheel is also different.
Skateboard wheels are usually made of polyurethane as the main material. The proportion of polyurethane in the wheel is different, and the hardness of the wheel is also different. The wheels with a hardness of 85A (A refers to hardness) are relatively soft, suitable for sliding on rough roads, and the noise is very small when sliding, which is a good choice for friends who like to pedal and go shopping.
38-40mm wheels are used by fewer people, the wheels start and accelerate quickly, but the stamina is small, which is suitable for very flat roads. 45mm-50mm wheels are the most suitable wheels for road type. 52-60mm wheels are more suitable for use on props.
The rebound of the wheel is very important. Although there are no parameters to refer to. But the stronger the rebound, the stronger the ability to overcome obstacles. If you don't know how well your wheel bounces, you can do a little experiment. Remove the bearing in the wheel, you throw the wheel hard to the ground, the high wheel bounces, the wheel will bounce to the ceiling, and the bottom bounce wheel will only flop against the ground twice.
Keywords:
Plate,wheels,prices,Plate,wheels,For,sale,Plate,wheels,company
Recommended News
DWSK SPROCKET
ADD: Shimenqiao Industrial Zone, Renqiu City, Hebei Province, China
TEL: 0086-317-2805558
FAX: 0086-317-2805556
QQ: 1148504595
E-MAIL: dwsk@vip.126.com
Alibaba: DongWang Sprocket
Mobile Site
Mobile Site
Copyright © 2022 RenQiu Dong Wang Machinery Parts Co., Ltd.