NEWS CENTER

DWSK Sprocket

Taper Bore Sprocket For sale


Time:

2022-08-18

The sprocket structure includes a sprocket body and a camshaft. The sprocket body is divided into an upper part of the sprocket and a lower part of the sprocket along the axis. The weight of the upper part of the sprocket is greater than the weight of the lower part of the sprocket, and the sprocket body is provided with a screw hole and a ring hole .

How much do you know about the structure of the sprocket? Let's follow the Taper Bore Sprocket For sale editor for a brief understanding!
The sprocket structure includes a sprocket body and a camshaft. The sprocket body is divided into an upper part of the sprocket and a lower part of the sprocket along the axis. The weight of the upper part of the sprocket is greater than the weight of the lower part of the sprocket, and the sprocket body is provided with a screw hole and a ring hole , The outer surface of the sprocket body is provided with a counterweight piece, which is divided into an upper counterweight piece and a lower counterweight piece along the axis. The weight of the upper counterweight piece is greater than the weight of the lower part of the counterweight piece. A perforation is provided, a shaft hole is arranged at the corresponding ring hole on the counterweight sheet, the screw hole and the perforation are connected by a screw, a screw hole is arranged in the center of the end face of the camshaft, and two screws pass through the shaft hole and the ring hole and enter the screw hole. When the sprocket drives the camshaft to rotate, the camshaft and the sprocket are in a state of balance, achieving smooth, labor-saving and smooth rotation, thereby improving engine efficiency.

Taper Bore Sprocket For sale
The above is a brief introduction to some knowledge about the sprocket structure of Taper Bore Sprocket For sale.

Keywords:

Taper,Bore,Sprocket