What you need to know about JIS sprocket!Time of issue : 2021- 07-16
JIS sprocket is a wheel with cog-type sprocket, which is used to mesh with a block with accurate pitch on a link or cable.
duplxe roller chain wheel sprocket tells: the reason for the failure of Sprockets?Time of issue : 2021- 06-10
For high-speed and heavy-duty gears, poor lubrication will cause local overheating of the Sprockets, resulting in discoloration and gluing.
JIS sprocket tells the knowledge about the improvement measures of sprocket!Time of issue : 2021- 04-02
A sprocket is a wheel with cog-type buckle teeth, which is used to mesh with a block with an accurate pitch on a link chain or a cable. It is widely used in mechanical transmission of chemical industry, textile machinery, escalator, wood processing, three-dimensional parking garage, agricultural machinery, food processing, instrumentation, petroleum and other industries.
JIS sprocket introduces what should be paid attention to when tightening sprocket drive?Time of issue : 2021- 03-25
Whether the layout of the sprocket transmission is reasonable has a great impact on the quality and service life of the transmission. When laying out, the two shafts of the chain drive should be parallel, and the two sprockets should be on the same plane. Generally, a horizontal or nearly horizontal layout should be adopted, with a loose bottom edge.
How to operate the maintenance of JIS sprocket?Time of issue : 2021- 03-18
The tightness of the JIS sprocket should be appropriate. Too tight will increase power consumption and the bearings will wear out; too loose will easily jump and fall off the chain. Its tightness is: lifted or pressed down from its middle, about 2%-3% of the middle distance between two JIS sprockets.
What are the reasons for the failure of JIS sprocket on sales?Time of issue : 2021- 03-11
For high-speed and heavy-duty gears, poor lubrication will cause local overheating of JIS sprocket on sales, resulting in discoloration, gluing and other malfunctions. There are many reasons why the lubrication is not good.