Language
language
中国
韩国
韩国
韩国
韩国
韩国
NEWS CENTER
DWSK Sprocket
Position:
Home
/
/
/
How to process the sprocket

How to process the sprocket

(Summary description)Copyright belongs to the author. For commercial reprints, please contact the author for authorization, and for non-commercial reprints, please indicate the source.

How to process the sprocket

(Summary description)Copyright belongs to the author. For commercial reprints, please contact the author for authorization, and for non-commercial reprints, please indicate the source.

Information

Processing method 1: sprocket scribing
Copyright belongs to the author. For commercial reprints, please contact the author for authorization, and for non-commercial reprints, please indicate the source.
In the conventional sprocket machining process, the root circle is used as the basis first, and the center of the circle is found. At the same time, this is used as the center of the inner and outer circles and the end face in calibrating the turning process. Then draw the keyway dimension line and insert the keyway. The center of the wheel and the center of the tooth shape produced by this method are often inconsistent, and the mechanical operation will be more unstable, and there will be no more obvious marks on the sprocket casting blank, resulting in the keyway. cannot be unified with each other.

Assembly Line Roller Sprockets company

Among large and medium-sized machinery and equipment, the sprocket keyway range is assembled in opposite directions on the left and right. After assembly, the misalignment of teeth is more serious. During operation, the sprocket and chain will be subjected to various forces, and the uneven force is very obvious. Seriously affect the service life of the sprocket.
Processing method 2: odd-numbered sprocket scribing method
Using the teeth at the casting mark position as a reference, the positions of the odd-numbered teeth near the center cross and relative to the center lines of the two teeth are demarcated and numbered. The focal point where the even-numbered teeth are actually close to the center cross line is connected to the previous point, and the midpoint is set as the center of the circle, then the result is the neutral point of the sprocket.

Keyword:

Scan the QR code to read on your phone

DWSK SPROCKET

ADD: Shimenqiao Industrial Zone, Renqiu City, Hebei Province, China
TEL: 
0086-317-2805558
FAX: 0086-317-2805556
QQ: 1148504595
E-MAIL:
dwsk@vip.126.com

Alibaba: DongWang Sprocket

COPYRIGHT © RenQiu Dong Wang Machinery Parts Co., Ltd.         冀ICP备19028325号-1       Power by 300.cn