NEWS CENTER
DWSK Sprocket
Disassembly of the V-Belt Pulley For sale
Time:
2022-06-16
Loosen all the bolts, take out one or two of the bolts according to the number of removal holes, lubricate the bolt thread and the tip of the bolt with oil, and insert the bolt into the removal hole.
V-Belt Pulley For sale belongs to the hub type parts, generally relatively large in size, and the manufacturing process is generally based on casting and forging. Generally, the larger size is designed by the casting method, and the material is generally cast iron (good casting performance), and cast steel is rarely used (the casting performance of steel is not good); generally, the smaller size can be designed for forging, the material for steel. So do you have the knowledge of its disassembly? Let's find out together!
1. Loosen all the bolts, take out one or two bolts according to the number of disassembly holes, lubricate the bolt pattern and the tip of the bolt with oil, and insert the bolt into the disassembly hole.
2. Alternately tighten the bolts until the taper sleeve and V-Belt Pulley For sale are loose.
3. Remove the taper sleeve and V-Belt Pulley For sale from the shaft.
Keywords:
V-Belt,Pulley
Previous
Recommended News
2023-02-18
DWSK SPROCKET
ADD: Shimenqiao Industrial Zone, Renqiu City, Hebei Province, China
TEL: 0086-317-2805558
FAX: 0086-317-2805556
QQ: 1148504595
E-MAIL: dwsk@vip.126.com
Alibaba: DongWang Sprocket
Mobile Site
Mobile Site
Copyright © 2022 RenQiu Dong Wang Machinery Parts Co., Ltd.