Language
language
中国
韩国
韩国
韩国
韩国
韩国
NEWS CENTER
DWSK Sprocket
Position:
Home
/
/
/
Daily maintenance method of sprocket chain

Daily maintenance method of sprocket chain

(Summary description)The sprocket chain should be installed on the shaft without skewing and swinging. In the same transmission assembly, the end faces of the two sprockets should be in the same plane.

Daily maintenance method of sprocket chain

(Summary description)The sprocket chain should be installed on the shaft without skewing and swinging. In the same transmission assembly, the end faces of the two sprockets should be in the same plane.

Information

1. The sprocket chain should be installed on the shaft without skewing and swinging. In the same transmission assembly, the end faces of the two sprockets should be in the same plane. When the distance between the centers of the sprockets is less than 0.5 meters, the deviation is 1 mm. When the center-to-center distance of the sprockets is 0 or 5 meters, the tolerance is 2 mm. However, the flanking phenomenon of the rubbing sprockets is not allowed, and if the two wheels are too large, the chain is prone to unchaining and accelerated wear. Offsets need to be carefully checked and adjusted when replacing sprockets.

Standard Sprockets company

2. The tightness of the chain should be appropriate, too tight will increase power consumption, and the bearing will be easy to wear; too loose chain is easy to jump and de-chain. The tightness of the chain is: lifted or squeezed from the middle of the chain, the center distance between the two sprockets is about 2-3 cm.
3. The new chain is stretched or stretched after use, it is difficult to adjust, you can see the situation of removing the link, but it needs to be even. The link should pass through the rear of the chain, the locking tabs should be inserted outside, and the openings of the locking tabs should be in the opposite direction of rotation.

Keyword:

Scan the QR code to read on your phone

DWSK SPROCKET

ADD: Shimenqiao Industrial Zone, Renqiu City, Hebei Province, China
TEL: 
0086-317-2805558
FAX: 0086-317-2805556
QQ: 1148504595
E-MAIL:
dwsk@vip.126.com

Alibaba: DongWang Sprocket

COPYRIGHT © RenQiu Dong Wang Machinery Parts Co., Ltd.         冀ICP备19028325号-1       Power by 300.cn