NEWS CENTER
DWSK Sprocket
Cleaning method of gear rack from China manufacturer
Time:
2022-06-02
Mainly sandblasting cleaning, using glass or ceramic particles to bury and clean, scrub and polish, and mechanically wipe off the contamination caused by burnt and polished or buried materials on the gear rack from China manufacturer;
Do you know what the cleaning method of gear rack from China manufacturer is? Let’s take a look at it briefly below!
1. Mechanical methods: mainly sandblasting cleaning, using glass or ceramic particles to bury the cleaning, scrubbing and polishing, mechanically wiping away the pollution caused by burnt and polished or buried materials on the gear rack from China manufacturer; various The pollution is mostly caused by uneven iron particles or chemical corrosion, especially in some humid environments, mechanical cleaning can progress under monotonous conditions, mechanical methods can only clean the surface, and subsequent polishing equipment is used to re-polish, and polishing Wax wrap.
2. Chemical method: Use chemical spray or pickling paste to passivate the rusted part of the chain, and form a chromium oxide film to restore it. It is necessary to remove all pollution and pickling residues, and rinse with clean water in time. After disposal, use equipment for polishing, and then wrap it with polishing wax; some micro rust spots can be wiped off with gasoline or oil and a clean rag.
The above is a brief introduction to the knowledge about the cleaning method of gear rack from China manufacturer.
Keywords:
gear,rack
Recommended News
2023-02-18
DWSK SPROCKET
ADD: Shimenqiao Industrial Zone, Renqiu City, Hebei Province, China
TEL: 0086-317-2805558
FAX: 0086-317-2805556
QQ: 1148504595
E-MAIL: dwsk@vip.126.com
Alibaba: DongWang Sprocket
Mobile Site
Mobile Site
Copyright © 2022 RenQiu Dong Wang Machinery Parts Co., Ltd.