Duplxe roller chain wheel sprocket introduces the method of measuring the tooth thickness of Sprockets?Time of issue : 2021- 04-29
To measure the tooth thickness with a vernier tooth thickness caliper, the advantage is that it is convenient and simple to use. The disadvantage is that the result of the measurement is affected by the diameter tolerance of the addendum circle (the addendum tolerance-generally h9), and the surface addendum is useless during the use of the gear.
The customized duplxe roller chain wheel sprocket teaches you how to test the tooth thickness of Sprockets?Time of issue : 2021- 04-20
The use of vernier tooth thickness calipers to measure tooth thickness has the advantage of convenient and simple use. The disadvantage is that the result of the measurement is affected by the diameter tolerance of the tooth tip circle (tooth tip tolerance-generally h9), and the face tooth tip is useless during the use of the gear.
The customized duplxe roller chain wheel sprocket tells the relevant knowledge of Sprockets heat treatment distortion!Time of issue : 2021- 04-12
The change in the volume and shape of the workpiece during the quenching process is due to the volume expansion and contraction caused by the specific volume change during the structural transformation of the steel, and the plastic distortion caused by the heat treatment stress. Obviously, the specific volume change during the phase change in the heat-treated steel must exist.
JIS sprocket tells the knowledge about the improvement measures of sprocket!Time of issue : 2021- 04-02
A sprocket is a wheel with cog-type buckle teeth, which is used to mesh with a block with an accurate pitch on a link chain or a cable. It is widely used in mechanical transmission of chemical industry, textile machinery, escalator, wood processing, three-dimensional parking garage, agricultural machinery, food processing, instrumentation, petroleum and other industries.
JIS sprocket introduces what should be paid attention to when tightening sprocket drive?Time of issue : 2021- 03-25
Whether the layout of the sprocket transmission is reasonable has a great impact on the quality and service life of the transmission. When laying out, the two shafts of the chain drive should be parallel, and the two sprockets should be on the same plane. Generally, a horizontal or nearly horizontal layout should be adopted, with a loose bottom edge.
How to operate the maintenance of JIS sprocket?Time of issue : 2021- 03-18
The tightness of the JIS sprocket should be appropriate. Too tight will increase power consumption and the bearings will wear out; too loose will easily jump and fall off the chain. Its tightness is: lifted or pressed down from its middle, about 2%-3% of the middle distance between two JIS sprockets.
What are the reasons for the failure of JIS sprocket on sales?Time of issue : 2021- 03-11
For high-speed and heavy-duty gears, poor lubrication will cause local overheating of JIS sprocket on sales, resulting in discoloration, gluing and other malfunctions. There are many reasons why the lubrication is not good.
What are the reasons for the wear and tear of the OEM Sprockets company?Time of issue : 2021- 03-10
The OEM Sprockets company is a wheel with cog-type sprocket teeth that meshes with a block of precise pitch on a link or cable.
Maintenance knowledge of OEM Sprockets supplier ChinaTime of issue : 2021- 03-04
OEM Sprockets are wheels with cog-type sprocket teeth that are used to mesh with blocks of precise pitch on link links or cables.
After more than ten years of steady developmentTime of issue : 2019- 09-11
After more than ten years of steady development and technological accumulation, it has become one of China's most experienced sprocket manufacturers.